ACRYLIC
FLOOR POLISH
808

THIS PRODUCT IS DIS-CONTINUED
DESCRIPTION: 808 ACRYLIC FLOOR POLISH is a water-based acrylic polymer, combined with a blend of poly waxes providing the highest degree of shine and protection available. 808 has more body than any other coating, and protects against scuffing in high traffic areas. This is the best maintenance product money can buy. It is manufactured to the highest standards found. Our unique molecular emulsion provides great stability and long life. Re-coating is easy over either water base acrylic, or polyurethane sealers. Use 808 for regular up-keep of your floors. THIS PRODUCT IS RECOMMENDED FOR INTERIOR USE ONLY.

DIRECTIONS: Apply only after properly sealing the floor with a gloss sealer. Wait at least 24 hours after sealing.
When applying 808, clean surface, and let dry completely. Then apply with a sponge, sponge mop, or a cloth. Allow at least 30 minutes drying time between coats. The body, and high gloss increase with additional coats, although one coat is usually all you need. You may re-coat worn traffic areas, without re-doing the entire floor. Regular cleaning can be done with water, and a light non-ammonia cleaner. Buffing the surface imparts a higher gloss. 808 ACRYLIC FLOOR POLISH can be stripped by using ammonia, and water added to any non-bleach household detergent.
Although the easiest method is to just get a "wax stripper" from your local janitorial supply house. These are above neutral ph cleaners.
When 808 gets wet, and above neutral ph, then it melts, and can be washed off. The sealer stays intact below.
This is much easier than having to remove the sealer with a paint stripper.

COVERAGE: One gallon of 808 ACRYLIC FLOOR POLISH will cover between 350 to 1000 square feet per gallon, depending on how porous the surface is.

LIMITS: Do not use below 45 degrees F. When testing for desired results; allow 24 hours for curing. When used on porous products such as stone, a good waterbased sealer must be applied and cured prior to applying 808. This is a polish and hardener, not a sealer. Apply a gloss sealer prior to
using 808. This is your sacraficial coating. It cleans off much more easy than a sealer, so you can have an easy re-coatable finish; while
the sealer remains intact below it.

CAUTION: Use rubber gloves when applying. Avoid contact with skin. Prolonged exposure to vapors may be harmful or fatal. Use in a well-ventilated area. In conditions which do not permit good ventilation, use of a breathing apparatus recommended.

NOTICE: Our only obligation shall be to refund the purchase price or replace any of our product proved to be defective. Beyond the purchase price of materials supplied by us, we assume no liability for damages of any kind, and the user accepts the product "as is" and without warranties either expressed or implied. The suitability of the product for an intended use shall be solely up to the user.
 
 

Product of:

Po Box 5358 - North Hollywood, Ca. 91606

808 is available in quarts, and gallons.

The suggested retail price is $30.04 per gallon - f.o.b. North Hollywood, Ca.

press one of the following buttons